Updated to tzdata version 2012c (article.gmane.org/gmane.comp.time.tz/4859).
Updated to tzdata version 2012b (article.gmane.org/gmane.comp.time.tz/4756).
Updated to tzdata version 2011n (article.gmane.org/gmane.comp.time.tz/4434).
Updated to tzdata version 2011k (article.gmane.org/gmane.comp.time.tz/4084).
Updated to tzdata version 2011h (article.gmane.org/gmane.comp.time.tz/3814).
Allow the default value of the local_to_utc and period_for_local dst parameter to be specified globally with a Timezone.default_dst attribute. Thanks to Kurt Werle for the suggestion and patch.
Add support for Ruby 1.9.3 (trunk revision 31668 and later). Thanks to Aaron Patterson for reporting the problems running on the new version. Closes #29233.
Updated to tzdata version 2011g (article.gmane.org/gmane.comp.time.tz/3758).
Updated to tzdata version 2011e (article.gmane.org/gmane.comp.time.tz/3707).
Updated to tzdata version 2011d (article.gmane.org/gmane.comp.time.tz/3662).
Updated to tzdata version 2010o (article.gmane.org/gmane.comp.time.tz/3473).
Updated to tzdata version 2010l (article.gmane.org/gmane.comp.time.tz/3354).
Corrected file permissions issue with 0.3.21 release.
Updated to tzdata version 2010j (article.gmane.org/gmane.comp.time.tz/3225).
Change invalid timezone check to exclude characters not used in timezone identifiers and avoid ‘character class has duplicated range’ warnings with Ruby 1.9.2.
Ruby 1.9.2 has deprecated “require ‘rational’”, but older versions of Ruby need rational to be required. Require rational only when the Rational module has not already been loaded.
Remove circular requires (now a warning in Ruby 1.9.2). Instead of using requires in each file for dependencies, tzinfo.rb now requires all tzinfo files. If you were previously requiring files within the tzinfo directory (e.g. require ‘tzinfo/timezone’), then you will now have to require ‘tzinfo’ instead.
Updated to tzdata version 2010i (article.gmane.org/gmane.comp.time.tz/3202).
Updated to tzdata version 2010h (article.gmane.org/gmane.comp.time.tz/3188).
Updated to tzdata version 2010g (article.gmane.org/gmane.comp.time.tz/3172).
Updated to tzdata version 2010e (article.gmane.org/gmane.comp.time.tz/3128).
Support the use of ‘-’ to denote ‘0’ as an offset in the tz data files. Used for the first time in the SAVE field in tzdata v2009u.
Updated to tzdata version 2009u (article.gmane.org/gmane.comp.time.tz/3053).
Updated to tzdata version 2009p (article.gmane.org/gmane.comp.time.tz/2953).
Added a description to the gem spec.
List test files in test_files instead of files in the gem spec.
Updated to tzdata version 2009l (article.gmane.org/gmane.comp.time.tz/2818).
Include current directory in load path to allow running tests on Ruby 1.9.2, which doesn’t include it by default any more.
Updated to tzdata version 2009f (article.gmane.org/gmane.comp.time.tz/2668).
Untaint the timezone module filename after validation to allow use with $SAFE == 1 (e.g. under mod_ruby). Thanks to Dmitry Borodaenko for the suggestion. Closes #25349.
Updated to tzdata version 2008i (article.gmane.org/gmane.comp.time.tz/2440).
Updated to tzdata version 2008g (article.gmane.org/gmane.comp.time.tz/2335).
Support Ruby 1.9.0-5. Rational.new! has now been removed in Ruby 1.9. Only use Rational.new! if it is available (it is preferable in Ruby 1.8 for performance reasons). Thanks to Jeremy Kemper and Pratik Naik for reporting this. Closes #22312.
Apply a patch from Pratik Naik to replace assert calls that have been deprecated in the Ruby svn trunk. Closes #22308.
Updated to tzdata version 2008f (article.gmane.org/gmane.comp.time.tz/2293).
Updated to tzdata version 2008c (article.gmane.org/gmane.comp.time.tz/2183).
Support loading timezone data in the latest trunk versions of Ruby 1.9. Rational.new! is now private, so call it using Rational.send :new! instead. Thanks to Jeremy Kemper and Pratik Naik for spotting this. Closes #19184.
Prevent warnings from being output when running Ruby with the -v or -w command line options. Thanks to Paul McMahon for the patch. Closes #19719.
Updated to tzdata version 2008b (article.gmane.org/gmane.comp.time.tz/2149).
Support loading timezone data in Ruby 1.9.0. Use DateTime.new! if it is available instead of DateTime.new0 when constructing transition times. DateTime.new! was added in Ruby 1.8.6. DateTime.new0 was removed in Ruby 1.9.0. Thanks to Joshua Peek for reporting this. Closes #17606.
Modify some of the equality test cases to cope with the differences between Ruby 1.8.6 and Ruby 1.9.0.
Updated to tzdata version 2008a (article.gmane.org/gmane.comp.time.tz/2071).
Updated to tzdata version 2007k (article.gmane.org/gmane.comp.time.tz/2029).
Removed deprecated RubyGems autorequire option.
Updated to tzdata version 2007h (article.gmane.org/gmane.comp.time.tz/1878).
Updated to tzdata version 2007g (article.gmane.org/gmane.comp.time.tz/1810).
Updated to tzdata version 2006p (article.gmane.org/gmane.comp.time.tz/1358).
Updated to tzdata version 2006n (article.gmane.org/gmane.comp.time.tz/1288). Note that this release of tzdata removes the country Serbia and Montenegro (CS) and replaces it with separate Serbia (RS) and Montenegro (ME) entries.
Remove colon from case statements to avoid warning in Ruby 1.8.5. #5198.
Use temporary variable to avoid dynamic string warning from rdoc.
Updated to tzdata version 2006j (article.gmane.org/gmane.comp.time.tz/1175).
New timezone data format. Timezone data now occupies less space on disk and takes less memory once loaded. #4142, #4144.
Timezone data is defined in modules rather than classes. Timezone instances returned by Timezone.get are no longer instances of data classes, but are instead instances of new DataTimezone and LinkedTimezone classes.
Timezone instances can now be used with Marshal.dump and Marshal.load. #4240.
Added a Timezone.get_proxy method that returns a TimezoneProxy object for a given identifier.
Country index data is now defined in a single module that is independent of the Country class implementation.
Country instances can now be used with Marshal.dump and Marshal.load. #4240.
Country has a new zone_info method that returns CountryTimezone objects containing additional information (latitude, longitude and a description) relating to each Timezone. #4140.
Timezones within a Country are now returned in an order that makes geographic sense.
The zdumptest utility now checks local to utc conversions in addition to utc to local conversions.
eql? method defined on Country and Timezone that is equivalent to ==.
with no identifier method.
with no code method.
hash method defined on Country that returns the hash of the code.
hash method defined on Timezone that returns the hash of the identifier.
Miscellaneous API documentation corrections and improvements.
Timezone definition and indexes are now excluded from rdoc (the contents were previously ignored with #:nodoc: anyway).
Removed no longer needed #:nodoc: directives from timezone data files (which are now excluded from the rdoc build).
Installation of the gem now causes rdoc API documentation to be generated. #4905.
When optimizing transitions to generate zone definitions, check the UTC and standard offsets separately rather than just the total offset to UTC. Fixes an incorrect abbreviation issue with Europe/London, Europe/Dublin and Pacific/Auckland.
Eliminated unnecessary .nil? calls to give a minor performance gain.
Timezone.all and Timezone.all_identifiers now return all the Timezones/identifiers rather than just those associated with countries. #4146.
Added all_data_zones, all_data_zone_identifiers, all_linked_zones and all_linked_zone_identifiers class methods to Timezone.
Added a strftime method to Timezone that converts a time in UTC to local time and then returns it formatted. %Z is replaced with the Timezone abbreviation for the given time (for example, EST or EDT). #4143.
Fix escaping of quotes in TZDataParser. This affected country names and descriptions of timezones within countries.
Use class-scoped instance variables to store the Timezone identifier and singleton instance. Loading a linked zone no longer causes the parent zone’s identifier to be changed. The instance method of a linked zone class also now returns an instance of the linked zone class rather than the parent class. #4502.
The zdumptest utility now compares the TZInfo zone identifier with the zdump zone identifier.
The zdumptestall utility now exits if not supplied with enough parameters.
Updated to tzdata version 2006g (article.gmane.org/gmane.comp.time.tz/1008).
Fix a performance issue caused in 0.2.0 with Timezone.local_to_utc. Conversions performed on TimeOrDateTime instances passed to <=> are now cached as originally intended. Thanks to Michael Smedberg for spotting this.
Fix a performance issue with the local_to_utc period search algorithm originally implemented in 0.1.0. The condition that was supposed to cause the search to terminate when enough periods had been found was only being evaluated in a small subset of cases. Thanks to Michael Smedberg and Jamis Buck for reporting this.
Added abbreviation as an alias for TimezonePeriod.zone_identifier.
Updated to tzdata version 2006d (article.gmane.org/gmane.comp.time.tz/936).
Ignore any offset in DateTimes passed in (as is already done for Times). All of the following now refer to the same UTC time (15:40 on 17 April 2006). Previously, the DateTime in the second line would have been interpreted as 20:40.
tz.utc_to_local(DateTime.new(2006, 4, 17, 15, 40, 0)) tz.utc_to_local(DateTime.new(2006, 4, 17, 15, 40, 0).new_offset(Rational(5, 24))) tz.utc_to_local(Time.utc(2006, 4, 17, 15, 40, 0)) tz.utc_to_local(Time.local(2006, 4, 17, 15, 40, 0))
Use timestamps rather than DateTime objects in zone files for times between 1970 and 2037 (the range of Time).
Don’t convert passed in Time objects to DateTime in most cases (provides a substantial performance improvement).
Allow integer timestamps (time in seconds since 1970-1-1) to be used as well as Time and DateTime objects in all public methods that take times as parameters.
Tool to compare TZInfo conversions with output from zdump.
TZDataParser zone generation algorithm rewritten. Now based on the zic code. TZInfo is now 100% compatible with zic/zdump output.
Riyadh Solar Time zones now included again (generation time has been reduced with TZDataParser changes).
Use binary mode when writing zone and country files to get Unix (n) new lines.
Omit unnecessary quotes in zone identifier symbols.
Omit the final transition to DST if there is a prior transition in the last year processed to standard time.
Updated to tzdata version 2006c (article.gmane.org/gmane.comp.time.tz/920).
Add lib directory to the load path when tzinfo is required. Makes it easier to use tzinfo gem when unpacked to vendor directory in rails.
Updated to tzdata version 2006a (article.gmane.org/gmane.comp.time.tz/738).
build_tz_classes rake task now handles running svn add and svn delete as new timezones and countries are added and old ones are removed.
Return a better error when attempting to use a Timezone instance that was constructed with Timezone.new(nil). This will occur when using Rails’ composed_of. When the timezone identifier in the database is null, attempting to use the Timezone will now result in an UnknownTimezone exception rather than a NameError.
Timezones that are defined by a single unbounded period (e.g. UTC) now work again.
Updated to tzdata version 2005q.
period_for_local and local_to_utc now allow resolution of ambiguous times (e.g. when switching from daylight savings to standard time). The behaviour of these methods when faced with an ambiguous local time has now changed. If you are using these methods you should check the documentation. Thanks to Cliff Matthews for suggesting this change.
Added require ‘date’ to timezone.rb (date isn’t loaded by default in all environments).
Use rake to build packages and documentation.
License file is now included in gem distribution.
Dates in definitions stored as Astronomical Julian Day numbers rather than as civil dates (improves performance creating DateTime instances).
Added options to TZDataParser to allow generation of specific zones and countries.
Moved TimezonePeriod class to timezone_period.rb.
New TimezonePeriodList class to store TimezonePeriods for a timezone and perform searches for periods.
Timezones now defined using blocks. TimezonePeriods are only instantiated when they are needed. Thanks to Jamis Buck for the suggestion.
Add options to TZDataParser to allow exclusion of specific zones and countries.
Exclude the Riyadh Solar Time zones. The rules are only for 1987 to 1989 and take a long time to generate and process. Riyadh Solar Time is no longer observed.
The last TimezonePeriod for each Timezone is now written out with an unbounded rather than arbitrary end time.
Construct the Rational offset in TimezonePeriod once when the TimezonePeriod is constructed rather than each time it is needed.
Timezone and Country now keep a cache of loaded instances to avoid running require which can be slow on some platforms.
Updated to tzdata version 2005n.
Removed debug output accidentally included in the previous release.
Fixed a bug in the generation of friendly zone identifiers (was inserting apostrophes into UTC, GMT, etc).
Fixed Country <=> operator (was comparing non-existent attribute)
Fixed Timezone.period_for_local error when period not found.
Added testcases for Timezone, TimezoneProxy, TimezonePeriod, Country and some selected timezones.
Reduced visibility of some methods added in Timezone#setup and Country#setup.
Added name method to Timezone (returns the identifier).
Added friendly_identifier method to Timezone. Returns a more friendly version of the identifier.
Added to_s method to Timezone. Returns the friendly identifier.
Added == and <=> operators to Timezone (compares identifiers).
Timezone now includes Comparable.
Added to_s method to Country.
Added == and <=> operators to Country (compares ISO 3166 country codes).
Country now includes Comparable.
New TimezoneProxy class that behaves the same as a Timezone but doesn’t actually load in its definition until it is actually required.
Modified Timezone and Country methods that return Timezones to return TimezoneProxy instances instead. This makes these methods much quicker.
In Ruby on Rails, you can now show a drop-down list of all timezones using the Rails time_zone_select helper method:
<%= time_zone_select ‘user’, ‘time_zone’, TZInfo::Timezone.all.sort, :model => TZInfo::Timezone %>
Country and Timezone data is now loaded into class rather than instance variables. This makes Timezone links more efficient and saves memory if creating specific Timezone and Country classes directly.
TimezonePeriod zone_identifier is now defined as a symbol to save memory (was previously a string).
TimezonePeriod zone_identifiers that were previously ” are now :Unknown.
Timezones and Countries can now be returned using Timezone.new(identifier) and Country.new(identifier). When passed an identifier, the new method calls get to return an instance of the specified timezone or country.
Added new class methods to Timezone to return sets of zones and identifiers.
Thanks to Scott Barron of Lunchbox Software for the suggestions in his article about using TZInfo with Rails (lunchroom.lunchboxsoftware.com/pages/tzinfo_rails)
First release.
Generated with the Darkfish Rdoc Generator 2.
![[+]](./images/find.png "show/hide quicksearch"){kind=small}